[bradyboyy88]

I was curious if the hotronix fusion hovers close enough to cure dtg inks surfaces to make it worth purchasing over the hotronix hover press with the caddie. I do mainly dtg so hovering does help to cure the ink but im curious if the hovering of the hover press is closer than the fusion just hovering over when on pressure 1.
That may be worded funny but i hope you get the point!

 

[ejnrby]

The hover press floats about 1/4" above the garment when in hover mode; the Fusion is a manual adjustment so you'd either have to hold the platen up or raise the heat platen a lot so it is hovering over the garment.