T-Shirt Forums banner

1 - 5 of 5 Posts

·
Registered
Joined
·
48 Posts
Discussion Starter #1
Hi All,

As the title says, our Hotronix Fusion, turns on but won't heat.

Checked outlet and cord, both have 120v. Can change any setting we like, but no heat. Popped cover but don't see any issues.

I'm not a tech, but definitely handy. Open to suggestions of what I can try since Stahl's is closed.

FYI - Press worked yesterday.

Thoughts?

Thanks!
 

·
Registered
Joined
·
48 Posts
Discussion Starter #4
After calling tech support. Our preliminary diagnosis is the thermostat. My unit has 2 so I ordered them today.

The only downside is Stahl's is performing a physical inventory so they won't ship until the inventory is done.

I guess I will have to enjoy the holiday now!
 

·
Registered
Joined
·
2,007 Posts
After calling tech support. Our preliminary diagnosis is the thermostat. My unit has 2 so I ordered them today.

The only downside is Stahl's is performing a physical inventory so they won't ship until the inventory is done.

I guess I will have to enjoy the holiday now!
They are generic components, so you can buy from elsewhere for less than $1. All you have to do is remove them to find the model number and rating.
If you do this way, then note that thermostats come in two variants per model number... A normally closed (NC) and a normally open (NO) one.
You probably need the NC one.
 
1 - 5 of 5 Posts
Top