T-Shirt Forums banner
1 - 1 of 1 Posts

4 Posts
The PE sensor or paper sensor. It is a trigger type sensor that is tripped when paper pushes it.

I have concluded that the problem is with the timing of this sensor. It is tripped twice... Once to verify paper and secondly when printing commences. If the timing is off you will get a paper feed error.

You can remedy paper feed errors created by the PW sensor by turning edge to edge printing off...

Bob ?;O)
hai guys ,,can you tell me how to setup paper sensor on DTG T1100,,becouse mine always error/paper jam,,will be good if you have picture of it,,thanks
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.