[ConfettiGifts]

I'm using sublicloth from Johnson Plastics and after I sublimate my design onto the sublicloth the image is sticky. I followed the directions they gave me. I placed it between teflon on both sides and pressed for 25-35 seconds at 400 degrees. The first time I couldn't even unpeel the sublimation paper from the sublicloth. The second time I got it to peel off but the image is sticky. Can anyone help me?
Thanks

 

[uncletee]

let it cool b/4 you peel. good luck uncletee

 

[ConfettiGifts]

Thank you uncletee. I tried waiting until it was completely cool but it was still difficult to peel, it stuck in one spot and it still feels tacky. Not as bad as before but still quite noticeable. Any thoughts, anyone?

 

[jpkevin]

Give me a call when you get a chance, so we can get this taken care of.

888-869-7834

Thanks.

 

[LEO]

Please post suggestions HERE
as I also have had this result.
Any tips on times/temps/pressure.
Have several projects coming up
which can only be done with Sublicloth.
THX ! LEO

 

[jpkevin]

I will certainly post results here. I would like to figure it out as quickly as possible, so it would be easier to talk directly.
[media]http://www.dyesublimation.com/documents/techtips/product-sublicloth_subliflock.pdf[/media]
Here is a link to the instructions.
Feel free to call me if needed.

 

[ConfettiGifts]

Called and left a message, waiting for a call back. Will update with suggestions and hopefully solutions when I hear back from Kevin at Johnson Plastics.

Donna
516-676-3059

 

[jpkevin]

I have been testing some of the Sublicloth and found that the rolls dated 10/16/13 seem to have adhesive that comes through the front of the material which it should not.

Please contact me if you have material that needs to be replaced. Thanks.

[email protected]
888-869-7834