T-Shirt Forums banner
1 - 8 of 8 Posts

· Registered
Joined
·
1,295 Posts
Do you have an image you can post displaying what's happening, or at least a better description of your "stripes".

For example, my printer had an issue where occasionally a black line going across my regular colored image (which wasn't black), this was caused by some fiber buildup on the side of the head.
 

· Registered
Joined
·
118 Posts
I live in a very dry place. Humidity is very important. I let my machine sit for a week in the winter and had to replace a print head. If this is the case you will have to clean the head very well with the cleaning kit. Maybe try soaking the head in solution and clean again. There is a cleaning cartridge you can try. You may have to replace the head if none of this works. Use your machine regularly! Just print any print each day or two for safety.
 

· Registered
Joined
·
1,557 Posts
Do you have a pic of the "stripes" you are getting. I also have a brother but have never had a problem with stripes? I did have to replace a printhead (not sure why) but it is a great machine and have never had any problems other than that. I have left mine off for over a month and it prints great each time so I am not sure why you would have to do a clean everyday or after 10 shirts.

Can you post a pic?
 
1 - 8 of 8 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top