Help with 1 letter

Your machine may not be capable of a satin stitch that wide... have you tried a tatami (fill) stitch instead?

Tried the fill stitch file and doesn't look good on the beanie
anyone else have something I can try

hey Larry, send the image my way : [email protected]. . i'll set it up for 3mm 3d foam for ya ~

Thanks for the offer Rick , but this has to be on a beanie and on the cheep $
If I can't find a good M to sew I will turn the job away
Larry

sandhopper2 said:

Thanks for the offer Rick , but this has to be on a beanie and on the cheep $
If I can't find a good M to sew I will turn the job away
Larry

Click to expand...

I was going to do it for free. plus I have a pr-1000 which is basically same as yours. send me the image and the dimensions. instructions if needed like 3d foam, flat, and fills. the distance of a satin (before it breaks) is half a inch.

Thanks Rick
Not sure what else to say or send
All I need is a letter M that is athletic font satin stitch 2.25 - 2.5 in tall for a Knit beanie
Larry

this is just a satin stitch M, setup 2.5h x2.25w..
it stiches a zigzag base with a M @1mm Density... then a top layer M with a larger pull compensation and density @ .4mm

it's about 2500stitches

beenprinted said:

this is just a satin stitch M, setup 2.5h x2.25w..
it stiches a zigzag base with a M @1mm Density... then a top layer M with a larger pull compensation and density @ .4mm

it's about 2500stitches

Click to expand...

Thanks , this looks like what I need but when I down load this it does not give it all to me
can you try and post this again
Larry

weird i can try emailing it if this doesn't work when you unzip it

Ben

[email protected]

Ben I sent you an e mail
I still can't get this to sew out the whole design , and when I look at it with My editor it only shows part of the top satin stitches

OK, so why wouldn't you spend $15.00 and have it digitized the way you want it?

I did not say any where that I would not pay
I bought a digitized font set and it was not good
So don't want tp waste more on this , I need to get my new software purchased so I can do this myself
I was a user of SEU when it was free now moving on to Embird as soon as I get the funds

Larry, don't take offense. None wa meant.
You've tried and can't get what you need. You have a customer who you have to take care of. How much time have you spent on this? You've had people trying to help you and you're not getting it done. There comes a point where we all have to do whatever it takes to satisfy and hopefully keep our customers.

I did not take offense , just stating
what I have tried
Not sure if this can be done and look right
That is why I was hoping that Ben had it correct as parts of what i could see looked good
Larry

Thank you Ben
the last file you sent via e mail works good
If you need a something I can help with just ask
Larry

Thanks everyone for the help , I will try all the suggestions

I often use an outline instead of a filled in letter....

the satins do not get too wide & looks nice...

Lou