[Roboto]

Can anyone help me? I m trying to stitch and the thread keeps going to where the bobbin is and the thread breaks. I adjusted the upper tension to 100 and the bobbin to 30 using a thread tensioner, cleaned the bobbin case(compressed air also) i also lubed up bobbin hook, and whenever i start to stich the thread goes to the bobbin area and then breaks at the top. Any help is appreciated!

Thanks!!

 

[Liberty]

what machine? All needles?

make sure the needle is not backwards.
make sure the needle plate is on correctly.
look for nicks and scratches on the needle plate and the hook.

 

[Roboto]

Hi, its a brother 0901 single head.
I checked and everything looks good. Heres a link to the video of what it does and it does it on all needles, I checked the hook timing and it looks good(hook tip right behind needle) the bobbin tension seems good i dropeed it like a yoyo and it drops about 2 inches, i also checked the upper thread and adjusted it with a guage at 130-150. Any help is greatly appreciated!!!

Thanks!!


[media]http://www.youtube.com/watch?v=6TG4zv8hrU4[/media]