[Paul1980]

I have a logo that needs printing onto a red t shirt. I have a vinyl plotter cutter and lot sizes of different colour vinyls, and a inkjet printer that allows me to print onto a white vinyl that I can then cut round and heat press. What would be the quickest way of putting this logo onto a red t shirt that won’t require too much weeding etc?? I have to do 20 of them so want the least time consuming way of doing this possible. Many thanks.

 

[mfatty500]

Get a transfer made. I use Howard custom thttp://www.howardct.com/ransfers, they are listed on the left hand side bar as a vendor.

 

[dcbevins]

You said you could print to vinyl. That to means an eco-solvent printer or the like. That would be the fastest. But I am thinking something does't sound right here. Those are usually print cut combo machines, but not always.

Cut vinyl would be the most tedious. You would have to lay down the black, then layer the white on top, and get the design right.

Plastisol transfers probably are the least hassle, Like Mike said. If you handed the whole order over to someone else, then maybe DTG.

 

[danversatrans]

Hi Paul

Your in box is full. You need to empty it.