T-Shirt Forums banner
1 - 14 of 14 Posts

· Registered
Joined
·
13 Posts
Discussion Starter · #1 ·
I need some help identifying a washout booth.
We bought all the equipment from another screen printing company and the washout booth came with it. It serves as 2 purposes here in our building a washout booth and a wash tub that we are required to have in our unit. I like the faucet in the tub. Due to some unseen circumstances I am going to loose the tub and would like to replace it with the same thing.

I can not find a brand or model or anything about it to try and find another one. After searching for awhile on Google I found 1 person selling one on OfferUp but no information about it.

Any help would be appreciated. I will attach pictures of it below.
 

Attachments

· Registered
Joined
·
13 Posts
Discussion Starter · #5 ·
I bought one brand new in the mid 90s from CalCom; I believe it may have been a proprietary brand.


Sent from my iPhone using Tapatalk
Thank you for the name CalCom. It allowed me to find a little more information in a few classified ads back in the 90's
I think I found something about CalCom being bought by MidWest Screen or something.

I guess these things have not been manufactured in 20+ years. Possibly almost 30 years.

Think I am going to have a real hard time locating one or I may just have to try and fabricate some type of faucet on a modern washout booth...
 

· Registered
Joined
·
13 Posts
Discussion Starter · #8 ·
you could easily buy something like this https://www.ebay.com/i/251341378569?chn=ps&dispItem=1
couple holes with a hole saw and done...
That was always in my mind but it seems like all of the "screen print" wash out booths are very shallow. I would need something deep like the old one pictured or the depth of a wash tub you would have next to your washer and dryer at home. I could build one but it would look kind of hokey and would have almost the same amount of money in it as just buying a cheap built wash out booth. If I was doing this as a hobby or from home I would probably build one or make something but I have a professional 6000sq/ft shop that I have a lot of big clients come through occasionally so appearance also has to look right.
 

· Registered
Joined
·
247 Posts
The Washout Booth itself was never mine I had just been borrowing it for a few years and now they need it back. So it needs replaced
Well that answers that question, some way to incorporate another brand or type into your current system ? Sometimes upgrading can save you money in long run.
 

· Registered
Joined
·
13 Posts
Discussion Starter · #12 ·
Well that answers that question, some way to incorporate another brand or type into your current system ? Sometimes upgrading can save you money in long run.
Yes, we made the decision today to go with a blackline washout booth and we're going to pick up a standard utility sink from the local hardware store to go next to it.
 
1 - 14 of 14 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top