T-Shirt Forums banner

heatpress vinyl on plastisol

4886 Views 5 Replies 5 Participants Last post by  Jinxplay
Can you or has anyone screened a shirt, cured the ink, the heat pressed vinyl on the cured ink, and if so will the vinyl hold on the ink?
1 - 6 of 6 Posts
Yes it will, the polyester coating in the vinyl will stick to almost anything and specially to plastic substrates. i would recommend o put some parchment paper( teflon will work) between the heating element and the plastisol, so not to damage the print.
  • Like
Reactions: 2
What I always tell customers is most will, but to test it first on one garment and see how it washes.
What I always tell customers is most will, but to test it first on one garment and see how it washes.
Nick...can you suggest which Stahls products would work? I typically use Sports Film Lite and Premium Plus.

Also....sent you an e-mail last week about my account. :)
Has anybody else had any success pressing heat transfer vinyl over plastisol transfers? I am creating a new line of shirts where the background image is going to be the same for all designs and I was thinking of getting a bunch of plastisol transfers for these, but the text / quotes are going to be different for each design and thinking cut out of white heat transfer vinyl to order.
Thanks guys, just save me some bucks with this one =)
1 - 6 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top