T-Shirt Forums banner

1 - 5 of 5 Posts

·
Registered
Joined
·
10 Posts
Discussion Starter #1
Need help quick!!! I have a customer that sprung a design change on me last minute from screen printing to a heat transfer design. I have heat transfer paper, JetPro SS, but the design is not showing up on on the dark shirt I need to print on. I have tried different settings on the press but still no luck. Itshows up a little bit but definitely not enough. Any suggestions and need to find a solution quickly. Thanks for any help.
 

·
Registered
Joined
·
3 Posts
Hi Swid
JetPro SS is for use on white or light coloured cotton or poly blend fabric, For the dark shirts you may need to use a different dark transfer paper, maybee try a search for iron-all.
Hope this helps m8 Gl Lee
 

·
Registered
Joined
·
996 Posts
Also with any of the dark papers, your going to have to trim completly around your design or you will get a white border.
 

·
Registered
Joined
·
628 Posts
If you want to stay with the Neenah brand paper you need the 3G Jet-Opaque transfer paper.
Its sold at the same places you bought your soft stretch.
 

·
Registered
Joined
·
1,959 Posts
Also, if you are applying to a dark colored polyester, you may experience bleedthrough. Opaque inkjet papers would be fine for 100% Cotton however.
 
1 - 5 of 5 Posts
Top