[simpso]

Hi
Anyone know any good heat transfer masks that work well with jet pro opaque ii?
Looking for a supplier in the uk . Pref resusable aswell to cut down costs

Any ideas?

 

[Ribcage]

Do you mean application film? If so, you could try MDP supplies. They have several locations in the UK

Sent from my SM-T310 using T-Shirt Forums

 

[simpso]

Do you mean application film? If so, you could try MDP supplies. They have several locations in the UK

Sent from my SM-T310 using T-Shirt Forums

Would these tapea be usuable?

Clear Application Tape | MDP Supplies

 

[Ribcage]

I'm not sure. I've never tried to reuse it. I just figure it in as part of my expense on each job that I use it. The cost per shirt is not very much.

 

[simpso]

I'm not sure. I've never tried to reuse it. I just figure it in as part of my expense on each job that I use it. The cost per shirt is not very much.

Do you have a link to actual product you use?

 

[Ribcage]

Sure, here you go...
Digi-Flex Mask Film | MDP Supplies

 

[simpso]

Sure, here you go...
Digi-Flex Mask Film | MDP Supplies

Would it be the top one of the two. And is it right that its 750m wide?
So do you cut from the sheet what you need ?
Also seems to suggest it will only work with their brand of transfer paper. Is this the case and i am using jet pro opaque?

 

[Ribcage]

Both are the same. The top one is for buying by the meter. I just cut off what I need for the job. It's made for digital print vinyl, but I've used it many times with jet pro dark successfully.

 

[simpso]

Both are the same. The top one is for buying by the meter. I just cut off what I need for the job. It's made for digital print vinyl, but I've used it many times with jet pro dark successfully.

Oh ok thats great. One last question. Does the transfer have any issues with heating?

As jet pro requires 190 c and a press of 30 seconds. These tapd says something about 15 seconds.

Any issues with melting or anything?