T-Shirt Forums banner

1 - 1 of 1 Posts

·
Registered
Joined
·
4,072 Posts
Discussion Starter #1
I sketched myself a heat press stand and thought I'd share. Free for personal use, no commercial use.

Curves are for aesthetics only, you can just cut the pieces rectangular. Can be cut from a 3x3 foot piece of 3/4" plywood. Total height will be about 29.5" with 2" caster wheels. If you omit the wheels, you should probably cut the legs a couple inches longer.
 

Attachments

1 - 1 of 1 Posts
Top