T-Shirt Forums banner

heat press borken help please

1070 Views 0 Replies 1 Participant Last post by  SeasideGraphix
Hello i have the 4 in 1 heat press from ebay.
The top plate was loose and the guy using it didnt tighten up the plate when he used it so when he swung the arm out the top plate fell off the arm and ripped the wires out of the top plate. I am not at the shop to see it but he said where the wires would connect its in the plate. Can this be fixed? Or do you know where i can get a new top plate?

thanks for any help........

Here is the info that's on the machine

4-in-1 Heat Press Machine
Model: jlco001
Dongguan JUSTRIGHT Heat Transfer Machine Factory
Power 1200w
Power Supply: 110v/220v 50 Hz
Temperature 0-399c
12" x 12"

1 - 1 of 1 Posts
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.