T-Shirt Forums banner

1 - 7 of 7 Posts

·
Registered
Joined
·
963 Posts
what can you be making with a 3ss stone. Anything smaller than a 4ss I thought were for fingernail designs. Anyhoo...times can be different from press to press so it is always best to test with your press but I usually press for 10-12 seconds. Actually I use this setting all all my stones not just the Korean ones.
 

·
Registered
Joined
·
616 Posts
Discussion Starter #4
I am doing a fill design and it is great -

what about the heat - I thought the smaller korean stones were different from the larger stones in what they needed. Just give me an idea of where a good place to start is and I will test
 

·
Registered
Joined
·
963 Posts
Regardless of the size, the glue is the same. I press 7mm stones the same time as 2mm stones. Heat for 320 degreess medium to heavy pressure
 

·
Registered
Joined
·
963 Posts
Are you doing this by hand? A 3ss stone has to be so tiny that you would need a magnifying glass to see it. Are you sure you are not using 3mm stones?
 

·
Registered
Joined
·
8,082 Posts
agree with previous post...around 320-325F for 12-13 sec...med pressure...and I would be surprised you are doing ss3 as that size is just 0.06 inches...

BTW...how is biz going?? hope all is working out
 
1 - 7 of 7 Posts
Top