[FulStory]

Hi all,

I am doing the heat transfer on the i guess is plastisol transfer but after wash I can see the ink is floating a little bit. So my question is do i need to use tape to stick at the shirt first before press? or any other mistake like temperature or time? I was given the suggestion to press for 140-160c at 6-10second. What is your people setting? thanks

 

[FulStory]

still finding answer. anyone can help? I have tried 135c and 140c, 6 and 8 second. heavy pressure. cant get any good result.

 

[royster13]

still finding answer. anyone can help? I have tried 135c and 140c, 6 and 8 second. heavy pressure. cant get any good result.

Your question is far too "vague" to get good answers.....

What kind of transfer? Where did it come from? What material are you pressing on?

 

[FulStory]

Your question is far too "vague" to get good answers.....

What kind of transfer? Where did it come from? What material are you pressing on?

i am not very sure the type of transfer. the image is glow in the dark. there is a transparent paper that have to tear off when hot. I get the sample from China. I am using cotton t shirt.