T-Shirt Forums banner

1 - 7 of 7 Posts

·
Registered
Joined
·
28 Posts
Discussion Starter #1
Today My Kiosk will start the warm up and move to the other end twice and quickly back like normal and then the final time it moves to the far end and stops and the error light and all the red lights above start flashing.

Thanks,
Tim
 

·
Registered
Joined
·
5,275 Posts
be careful with the rubbing alcohol it can dry up a lot of your parts..

I suggest 50/50 (Windex w/ ammonia and water)


Also, you may need to check your ribbon cable see if its secure and in place
 

·
Registered
Joined
·
2,645 Posts
Also check the gear for the belt that moves the print head. They tend to get full of crud and then the print head loses it's position. My Kiosk was constantly leaking ink onto shirts and started printing a lot of rainbow patterns, we replaced the motor that drives the belt and it's been fine ever since.
 
1 - 7 of 7 Posts
Top