[Goldnadir19]

Tested a transfer and noticed the red color bubbling/ peeling on my 4.5 oz anvil charcoal tees but no the white. I have tried both 365 for 5 seconds and 340 for 10 seconds with the same fail. Anyone had a problem like this before or have a fix??

 

[tazzringel]

Most of the time the cause is moisture in the garments. Moisture in the transfer.
Depending who its from and how you store transfer.

Make sure you heat your press, the bottom platen and the garments prior to transfer process.

 

[beanie357]

get a laser temp gun. home depot. ck heat.
press shirt 1st to remove maoisture and flatten.
retry if above cks out.
We did a bunch of goof proofs and never had an issue.
If contiues call 'em. They can help

 

[Goldnadir19]

A big thanks to everyone for the input! I called TE and they said to up the pressure from 6 to 8/9 and press @ 340 for 10 seconds and after i did that i never had another problem. Goof proofs have never given me a problem in the past, only when having too little pressure for lighter weight garments. I will try a higher pressure rating next time if I have an issue. Thanks again for the support!