[nevessa]

Hey All,
I am sublimating on 7 7/8" x 11 1/4 " glass cutting boards using 8 1/2" x 14" paper to get complete coverage. I use a Ricoh 3110dn. I want to print on larger glass, 11 1/4" x 15 1/4". I tried using 2 -
8 1/2" x 11" sheets, but there was a visible line in the middle, I was afraid this would happen, but had to try it. Just wondering if anyone else has tried to do this with any success?

 

[uglovdkg]

Depending on my design i print the images and trim the paper and place on the shirt

 

[skdave]

Cutting board are too expensive to mess up. use a one sheet transfer.

 

[nevessa]

Yes, I agree, but the problem is the one sheet leaves a border. I was trying to cover as much as possible. Thank you for the reply.

 

[pisquee]

You need to buy a bigger printer, and press, or get someone to do it for you who has these things. If your press is big enough, then you can get someone else to print the transfers for you and post them to you.

 

[nevessa]

Yes, I thought of the bigger printer because I do have a 16 x 20 press. Getting someone to print for me would be a lot cheaper than buying a bigger one. Someone pm'd me a price of $1.99 for two images on one sheet. Maybe I will consider that. Thanks for the reply!

 

[pisquee]

Have a look here if you're needing transfers: Sublimation Transfers