T-Shirt Forums banner
1 - 3 of 3 Posts

·
Registered
Joined
·
20 Posts
Discussion Starter · #1 ·
Hi - was wondering if anyone would know what you need to convert a USA bought & made Geo Knight DS20 heat press? It was shipped to Australia (which is where we operate) and still has the US power supply. I think we may need a converter but am a little unsure - thanks in advance Alison
 

·
Registered
Joined
·
3,753 Posts
Hi - was wondering if anyone would know what you need to convert a USA bought & made Geo Knight DS20 heat press? It was shipped to Australia (which is where we operate) and still has the US power supply. I think we may need a converter but am a little unsure - thanks in advance Alison
The US heat presses have two power supply options (110v or 220v).

If you have the 220v version then you can use it on 230v without a problem.

If you have the 110v version Two options:
1)Use a 3kw (or more) step down transformer.
2) Swap the 110V heating element with a 220V one. This will convert the 110v press to a 220v one.
 

·
Registered
Joined
·
20 Posts
Discussion Starter · #3 ·
The US heat presses have two power supply options (110v or 220v).

If you have the 220v version then you can use it on 230v without a problem.

If you have the 110v version Two options:
1)Use a 3kw (or more) step down transformer.
2) Swap the 110V heating element with a 220V one. This will convert the 110v press to a 220v one.
Thanks transformer it is, thought as much, regards Alison
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top