[oldfaithful]

Hi Guys

I am looking for advice on purchasing a Full Set Up

Having gone through numerous threads on here i wanted to purchase a well known brand such as Stahl or Geo Knight but found this on ebay

http://ebay.eu/1i5hUb4

Is this a decent looking set up ?

I have a start up budget of around £1.500 to get me fully set up

Any help is most appreciated

Thank You

 

[InfaRedd]

You get what you pay for.

 

[PositiveDave]

good point, check the service back-up, I suspect that this is Chinese import.

 

[Rogray]

Hi Guys

I am looking for advice on purchasing a Full Set Up

Having gone through numerous threads on here i wanted to purchase a well known brand such as Stahl or Geo Knight but found this on ebay

5 in 1 Combo Heat Press + Vinyl Cutter Plotter + Printer + Business Bundle New!! | eBay

Is this a decent looking set up ?

I have a start up budget of around £1.500 to get me fully set up

Any help is most appreciated

Thank You

If you are serious it's not worth the risk in my opinion.

 

[diveuk]

As has been stated "you get what you pay for", the heat press(which in my opinion is your most important bit of kit) will be on the flimsy side which may mean that you cannot achieve constant, even pressure across the platen, the heating element may or may not give an even temperature across the platen. The cutter will be stepper motor driven, noisy and jerky, may not give a smooth, accurate, even cut.
My advice, if you are on a budget, look for well looked after, branded s/h equipment.