T-Shirt Forums banner
1 - 2 of 2 Posts

· Registered
1 Posts
Discussion Starter · #1 ·

I've recently bought a transferpress and a Canon i-SENSYS MF645Cx with Ghost white ink. I've been trying to marry the a to the b sheet but failed almost every time. One time it worked and I later tried doing it again with the same settings etc. and did not work. Some of the ink stays on the b sheet (see pictures). Even when I use different settings for pressure, temperature and time etc. Also when I do the exact same as instruction videos, it just doesn't work. Lately I've been think that maybe the problem is the printer. The initial print from the printer is al lot less solid and filled up than prints I see on instruction videos.(see pictures)
Please help me, all tips are welcome.

Rectangle Font Material property Wood Gas
Rectangle Font Line Material property Gas
Rectangle Font Material property Magenta Wood
Rectangle Font Line Material property Gas
Rectangle Wood Material property Tints and shades Electric blue
Rectangle Cross Finger Material property Wood
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.