T-Shirt Forums banner
1 - 1 of 1 Posts

227 Posts
humming said:
Thanks for your reply.

Just trying to understand.

what's the purpose of flooding the screen?

why can't I just pull the squegee across the screen to push the ink onto the shirt, without first flooding the stencil?

On small to medium prints you can pretty much get away with it with no problems however of you look at the squeegee blade when you are pulling it the bead of ink built up on the front of the blade is what feeds the ink, if there was prior flooding, when you are pulling the squeegee.... The bigger the print the more likely you'll run out and have light spots or no ink spots....

sometimes i switch back an forth on a midsize print run... will flood, flood, notice bead has greatly thinkened so no flood, no flood, bead is getting smaller so back to Flood, flood, and etc...
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.