T-Shirt Forums banner

1 - 4 of 4 Posts

·
Registered
Joined
·
382 Posts
Discussion Starter #1
I recently purchased a 20 amp flash cure unit from Ranar. I took it home not realizing my outlets are 15 amps. The probably is I'm in an apartment running it out of my garage so I doubt I can mess with the wiring. Is there any quick fix to get this thing to work or any other 15 amp flash curing units?
 

·
Registered
Joined
·
1 Posts
That would be a very un-wise thing to do, the wires in the wall are rated for different electrical load a 15 amp circuit is wired differently then a 20 amp circuit. worse case scenario you'll burn down you apartment building best case you will probably melt your wires. I would find another way to do it.
 
1 - 4 of 4 Posts
Top