After posting and not giving all the info, I decided to get back on here and try to explain a little more clearly. Or the best I know considering I’ve just got into this business. Here is some info on what I have goin on. I have a apple phone, iPad, and Mac book. I plan on using my iPad
, but if I can’t I’m going to use the Mac. These are the new product I have bought. Epson 7110, with stock cartridges. I also bought a ciss system but have not hooked it up. I have a new cameo 3 along with the extra long 24” cutting board. I’ve got Pixlr and instalogo which I’m using for my programs. I’m only going to make shirts and mostly athletic jerseys etc. What programs do you recommend for me to use for logos, vectors and numbers? I’ve designed a couple of logos (simple vector style with only red and black colors) and printed them out and decided to run a few samples on my white 100% shirt. I pressed for 50seconds at 375 and ran 2 designs on this shirt. Both looked good on paper but when printed on shirt both were bright neon yellow barely visible. I’m new to all of this and thought paper was the issue and still may be. I’ve done all my test and nozzle checks etc and everything looks right. As I e said I’m new to all of this and I’ve got 10 plus hours, just getting to this step and still nothing to show lol! Please help me out on what is wrong? What kind of paper should I buy and am I running the press too long and hot? I’ve seen anywhere from a minute to 20seconds. Any help would greatly help me out thank you.