T-Shirt Forums banner
1 - 3 of 3 Posts

· Registered
Joined
·
31 Posts
Discussion Starter · #1 ·
We're looking to move into the large format printers, for primarily two reasons. 1) Cost of ink savings 2) To cut down on clogs and maintaince issues like we have been experiencing with our workforce 7010 printer. We briefly considered the Epson 4800, which we could save on ink with, but it is not pressurized so I don't think that would fix our clogging issues.

That leaves us large format printers 22"-44". We're wanting the best balance of operating costs and inks with speed. Speed is very important to us because it will be going into a high-production area, but the printer also needs to be simple enough we can train staff on it. We will be doing a wide variety of sublimation from soft to hard substrates.

Enough details, dying to hear your recommendations! What printers would you recommend and why?
 

· Registered
Joined
·
618 Posts
We've not had issues with clogging since moving to wide format printers, and InkTec Sublinova inks. Starting in an Epson SP4400, and moving through the 7600 to the 9600 we're currently using.
Not pressurised, and all works fine. Could not be happier in fact.
We loved the improvement of the 7 colours of the 7600/9600s compared to the 4400's 4.
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top