T-Shirt Forums banner

1 - 4 of 4 Posts

·
Registered
Joined
·
7 Posts
Discussion Starter #1
Hello,

I am new to screen printing and i had a few frustrating things i needed help with. I have just stated printing and i am getting into my first halftone job and im having problems with the exposure time with the XPO-2426 Vacuum Exposure Unit i am using. I started with ChromaLine Chroma Blue and i am exposing it for 1 min 30 sec withthe 20watt bulbs the unit came with and i am having a very hard time getting the halftones out before i end up blowing the image out. I am also using 1x1 coat on each side with the round edge of the scoop coater plus im ending up with holes in the emulsion randomly placed i have to tape over to prevent leakage...any advice? :(
 

·
Registered
Joined
·
7 Posts
Discussion Starter #3
still seems to have trouble breaking halftones out, i think im just not doing something right with my calculations:confused:
 
1 - 4 of 4 Posts
Top