T-Shirt Forums banner

1 - 3 of 3 Posts

·
Registered
Joined
·
20 Posts
Discussion Starter #1 (Edited)
Screen: 50T
Ulano Proclaim: one layer each side
2 x 500W halogen
distance: 16"
pattern line thickness ca 1-1,5 mm
screen size ca. 8" x 10"

here is a rather small picture showing ca. half of the screen

If you'd like to download a high quality detailed picture click here:drop.io UlanoProclaimTest

 

·
Registered
Joined
·
20 Posts
Discussion Starter #3
Looks good, so what was you outcome? Looks like around 3 mins.
Hi, I would say between 2-3. If you have a closer look you will see 2 minutes is the cleaner than 3 but honestly you cannot see any difference on substrate.

I made another test on much coarser screen - almost twice coarser and after 2,5 minutes exposure the emulsion started to wash off.

I would go for say 3-4 minutes if you put thick coats or two layers each side.

I will stick to 2,5 min. next time I expose 50T. I put rather thin layers - one each side.

Anyway Ulano Proclaim is a very quick emulsion and my problems with it stopped once I started doing step tests.

Viktor
 
1 - 3 of 3 Posts
Top