T-Shirt Forums banner
1 - 1 of 1 Posts

76 Posts
could be you ink too....
or could be the garment itself....
on dark shirts - specially red and burgundy, I stay away from 50/50 cotton/poly
Make sure you are using the proper ink
a good white ink should be creamy and easy to print it thru a 110 to 140 mesh and white/flash/white should be more than enough. If you are not getting a nice white this way, then you need to re-visit everything starting from your screen.
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.