T-Shirt Forums banner

1 - 4 of 4 Posts

·
Registered
Joined
·
48 Posts
Discussion Starter #1
Hi all, I picked up the second hand machine I posted about recently.

I got it for a good price - it needs a few bits doing. One of which was to replace the capping station.

I've done this today, but am now getting error 00010035, which seems to relate to the home position of the capping station.

All gearing is back where it should be, and the pump is turning, but no joy :(

I even replaced the sensor from that of the old station but still not working.

Has anyone got any suggestions as to what I can look at next? I really need this machine running and won't be able to contact Resolute til Monday
 

·
Registered
Joined
·
837 Posts
Hi all, I picked up the second hand machine I posted about recently.

I got it for a good price - it needs a few bits doing. One of which was to replace the capping station.

I've done this today, but am now getting error 00010035, which seems to relate to the home position of the capping station.

All gearing is back where it should be, and the pump is turning, but no joy :(

I even replaced the sensor from that of the old station but still not working.

Has anyone got any suggestions as to what I can look at next? I really need this machine running and won't be able to contact Resolute til Monday
What was the error before replacing the capping station?
 

·
Registered
Joined
·
48 Posts
Discussion Starter #3
There wasn't one colin - I replaced it due to the state of it. I've fixed it now though.

The locking bar was sticking slightly causing the error.
 
1 - 4 of 4 Posts
Top