T-Shirt Forums banner
1 - 2 of 2 Posts

·
Registered
Joined
·
40 Posts
Discussion Starter · #1 ·
Hi guys!
I have a epson 3880+ufo printer since 3 years and all is ok!
Since 1 month i bought a used p600 (serie 1) + ufo base.
The modification is ok and the communication between base and printer is ok!
I bought ink ciss and refill cartdfrige from china; they recognized !
I check my printhead , i do a manual flush with cleaning ( the printhead seems to be ok)
My problem is: when i launch a print no ink(or cleaning fluid) exit from the print head.
I try to do many power cleaning and the problem is the same.
Someone could tell me if it s a printhead peoblem, damper problem, ink assy problem, pump problem?
Many thanks.?????
 

·
Registered
Joined
·
5 Posts
probably you have already checked, but on a old printer with ciss i remember there was a rubber stopper to remove, otherwise the circuit will do a "syringe" effect.
Don't know if modern ciss has this, it's a bit i don't use them
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top