T-Shirt Forums banner

Epson p 800 can not reset ink with chip resetter

1135 Views 6 Replies 4 Participants Last post by  a3inc
Hello, I recently purchased a ufo printer base for the epson p 800.

I wish i would of new about the american made models not being able to reset with regualr ink carts.

I purchased the ink resetter from ali express.Basically the only one out there.It worked the first time i used it but i need to reset the inks again and this time in resets all but one ink.I think it is the oringal one that was not working thats way i bought the ink resetter.

I can not reset normally as there in no cover to open.
If i push the next buttom then it wants to open the cover but then has an error as there no cover to open.

I can not fix this error.I hope someone can help.
1 - 7 of 7 Posts
sound to me you have a bad cartridge, electronics sometime go bad,,, are you using refillable cartridges with the reset chip on them??
This model can reset only 1 time.
For reset more time need use a decoder board.
I would say get a new mother board,, I see them online for $50 or more, not a big job to replace..
im having a sort of similar problem with the waste ink counter.... the ssc utility wont allow me to reset it, it just gives me the "printer off or some other problem" error box.
give this a go,,may do the job.. when it asks you for the verification numbers/license just type in trial. Make sure the printer is on... wicreset/trial
give this a go,,may do the job.. when it asks you for the verification numbers/license just type in trial. Make sure the printer is on... wicreset/trial
are you replying to my post or the ones above it?
1 - 7 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top