T-Shirt Forums banner
1 - 3 of 3 Posts

·
Registered
Joined
·
1,537 Posts
Discussion Starter · #1 ·
In the middle of printing the other day my F2100 started acting a little weird and the quit on me giving me this error. When I restart it gets to the point after you shake the white ink carts and hit the OK button this error appears and that's it. I have to power down. I can't seem to find much about this error code online for the F2100 except the usual code error list for Epson printers. Any ideas on where I should start after the list or has anyone in here had this problem?



 

·
Registered
Joined
·
4,356 Posts
From the F2000 service manual
Font Material property Parallel Screenshot Number

The procedure for all printers is the same...
First check if one of the fuses is blown on the mainboard.
If the fuse is blown, replace it along with the FFC cable.
If it it blows the fuse again, your printhead is dead.
If it does not but the error remains, the mainboard itself is damaged.
 
1 - 3 of 3 Posts
Top