[frankdoyal05]

Diy Dtg epson R1800 paper and ink Led flashing as soon as it powers on, power light goes off as soon I get the 2 flashing paper and ink lights. I have the pe censor wired to a switch, tried to get it going in sheet and roll mode no difference. Installed new PF motor and censor assembly, that did not help, installed different main board still the same thing. I tried the adjustment program to see if that would help, that did not worked cause power light goes off soon after get the two flashing lights...

 

[frankdoyal05]

Problem solved by installing new APG Essy and new CN5 ribbon cable, however took a little time to reset it to roll mode due to the PE censor is wired to a switch..