[Stitch-Up]

Hi guys

I'm getting the error 000100B after switching on. I can't get beyond it just now and have a stack of shirts to print - we call it 'Sod's Law'

I have searched the forum for the error but no definitive answer.

Cheers

John

 

[Belquette]

Head temp error.
This can be caused by a few things, but if you have not messed with the fluid connections on the print head then you will probably need to clean and re-seat the print-head cable.

Did you try AA tech support yet?

 

[Stitch-Up]

Hi Mark and thanks for the info. Hope you're keeping good.

Yes, AA were on to it before I finished typing the post in the forum

Late here now, so I'm gonna climb the wooden hill to bed - hectic day ahead!!!

Have fun

John

 

[Belquette]

Great, hope you get it fixed up!

 

[Stitch-Up]

The Tigers might be 5000 miles away from me but when things go wrong, it's like having them in my print room

Thanks for your amazing support and helping me solve this problem - I never expect you guys to work into the weekend but you're all so devoted to getting problems sorted.

Look forward to receiving the Dark Media Production Mode Profile.

Thanks

 

[allamerican-aeoon]

Head temp error.
This can be caused by a few things, but if you have not messed with the fluid connections on the print head then you will probably need to clean and re-seat the print-head cable.

Did you try AA tech support yet?

Thank you so much for your attention to NeoFamily
Even though you said you will never post in TSF ever but you realize how urgent John was and you decide post to help him. Thank you again.
Cheers! Beers are on me always!
PS: I rarely post on BQ area but I should pay back to your kindness. Thx again

 

[artography]

Head temp error.
This can be caused by a few things, but if you have not messed with the fluid connections on the print head then you will probably need to clean and re-seat the print-head cable.

Did you try AA tech support yet?

I have the same issue after installing a new head. The new head (and new ribbon cables) worked for half a day when it suddenly stopped with this error. I have re-seated all cables, but still the same error code. Any other suggestions? It is a brand new head, I cannot imagine that it can break down already?

 

[allamerican-aeoon]

Are you a NeoFamily? Bought 2nd hand? Or have other printer 4880 base?
Cheers! Beers are on me always.

 

[artography]

Viper, was new 2 years ago, 4880 based

 

[ozrehber]

service req 1001d .I had to replace my epson 4880 s conveyor belt and an error message appears on the screen .Did I lost the machine completely or is there hope?İs there anybody who can advice me how to enter the self adjustment menu.I meen how can I overcome that service req 1001d message.any help will be higghly appreciated.

 

[Stitch-Up]

Is the carriage moving freely and reaching the home position? Have you checked the encoder strip is nice and clean?

 

[allamerican-aeoon]

service req 1001d .I had to replace my epson 4880 s conveyor belt and an error message appears on the screen .Did I lost the machine completely or is there hope?İs there anybody who can advice me how to enter the self adjustment menu.I meen how can I overcome that service req 1001d message.any help will be higghly appreciated.

Aren't you from Turkey?
Do you own NeoFlex?
Company name?
Cheers! Happy holidays. Peace and Joy.

 

[EricDeem]

service req 1001d .I had to replace my epson 4880 s conveyor belt and an error message appears on the screen .Did I lost the machine completely or is there hope?İs there anybody who can advice me how to enter the self adjustment menu.I meen how can I overcome that service req 1001d message.any help will be higghly appreciated.

Check the sensor that is located near the belt gear. Look near the end of the encoder strip where the carriage sits. You will need to release the carriage to access the sensor. Sometimes it can get bumped when removing/installing the belt and become misaligned causing this error code.

 

[allamerican-aeoon]

I don't think he is NeoFamily.

 

[ozrehber]

Yes ALL AMERICAN you are right.I bought a second hand TEX JET
polyprint a couple of months ago and a very new beginner in the DTG .Texjet uses epson 4880 as the main printer .I appreciate you guys for your helps. Itried to solve problem but it is getting more and more difficult to solve I think.Now there is a message on the screen.UNLOCK PRİNT HEAD. I m pulling the green lid on te head but the same message.I m releasing the head manually same message.I m releasing the conveyor band again the same.

 

[allamerican-aeoon]

Lol,
I wish you told us from beginning but thx for cleared.
Cheers! Happy new year to you.

 

[darrenbauer]

Has anyone came up with a fix for the SERVICE REQ. 0001001B error. I installed a new print head for the T-Jet Blazer DTG and now I get this error code. Any help would be greatly appreciated. thanks so much