T-Shirt Forums banner

201 - 210 of 210 Posts

·
Registered
Joined
·
949 Posts
Since I'm in both the Yahoo homemade_dtg group and these forums I am going to post this here as well... In order to prevent the CD-R sensor from tripping you have to remove the latch that tells the printer that the door has been opened. Opening the door is the start of the sequence that tells the printer you are going to print a CD-R...

If you have built a 1400 based DTG we would appreciate if you would share your finding here...

I removed the latch and the sensor, I also remove the paper sensor and still, when Isend something to print, it start, but then the printer head or ink stay on the left side of the printer and the ink and peper red light turn on
What to do?
Thank you
 

·
Registered
Joined
·
1,875 Posts
the CDR sensor is either an open or closed switch. I forget which. My machine isn't available to me at this time but I think I just cut the wires and twisted them together.
 

·
Registered
Joined
·
2 Posts
Has anyone had luck with the 1400? I am still in the tear down process and stuck. I have a manual but it is incomplete.

any help appreciated!
Thanks
 
201 - 210 of 210 Posts
Top