T-Shirt Forums banner

1 - 9 of 9 Posts

·
Registered
Joined
·
44 Posts
Discussion Starter #1
While trying to get my printer to work I decided to change the encoder strip thinking that may help. Well now I have a brand new issue. The printer head just slams against the other side of the printer every time I power it on. I've put 2 new strips and 2 new springs. What am I doing wrong?
 

·
Registered
Joined
·
2,497 Posts
While trying to get my printer to work I decided to change the encoder strip thinking that may help. Well now I have a brand new issue. The printer head just slams against the other side of the printer every time I power it on. I've put 2 new strips and 2 new springs. What am I doing wrong?
You are feeding it through the sensor on the back of the print head carriage?
 

·
Registered
Joined
·
44 Posts
Discussion Starter #3
I was feeding it behind the carriage head not through it. Got that issued fixed! Thank you.

Now if I can get ink to come out of this i'll be all set.
 

·
Registered
Joined
·
2,768 Posts
Just throw this out shot in the dark. Do u have a shut off valve on the waste tank. If it is closed or line to waste tank pinched or clogged it will prevent ink flow. Been there done that.
 
1 - 9 of 9 Posts
Top