T-Shirt Forums banner

1 - 2 of 2 Posts

·
Registered
Joined
·
14 Posts
Discussion Starter #1
hey i recently bought Chroma/Tech PL-2 Dyed from atlas supplies and i would like to know if anyone had any advice on how to work with this emultion i used be a diazo photo emultion from speedball before but now am having troubles on how much time should i put it under the lamps( am using 2 "500" watts lamps) because i tried 2 different set of times but every time i go wash away the design some big parts of the coating comes off and thats after being under 40 min from the lamps
any help is appreciated
 

·
Registered
Joined
·
456 Posts
That emulsion is supposed to be a fast exposing emulsion with a good quality light source.

If you are having problems I would start from the beginning.

1. is the screen properly washed and rinsed?
2. did you coat the screen one coat on each side?
3. how far is the light from the screen when you expose it?
4. how are you washing it out? gentle spray?

There are alot of posts on this forum that might give other clues as to why you are having problems.

Good luck!
 
1 - 2 of 2 Posts
Top