[into the T]

right-click on the programs icon and look for something like 'compatibility',
then click that and run through the process (keep doing it for all the options and pray one works)

try running windows 7 in a virtual machine like oracles virtualbox (free)
keep your windows 7 serial numbers written down somewhere

or if you have an older laptop leave it as windows7,
and just turn off the internet on it and use it as a dedicated cutting laptop (or buy a cheap used one)

or download make the cut and see if it works, then purchase it if it does

post your query here as well

EDIT:
according to this the eagle's work with make the cut, and the forum above says mtc works in windows10

EDIT @:
check this post

 

[into the T]

hopefully it works out for you without shelling out your cash

here is the manual if you don't have one

 

[into the T]

have a great day!

 

[into the T]

try signblazer (free) and see if one of the listed cutters work with your cutter (like blackcat, copam, redsail, etc.)

try some generic hgpl drivers here

download oracle's virtual box here, and install windows 7 (hopefully you kept your code, or just reinstall when the timer runs out)
then re-install your program there (ensure you have share on)

or, setup a dual-boot with windows 7