T-Shirt Forums banner
1 - 3 of 3 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter · #1 ·
Has anyone had any experience with a 100% polyester microfleece blanket and sublimation? Can I set my heat press to 380 degrees and press for 60secs? Thank you for any advice/help :)

I'd appreciate any help with temp, time, and pressure (though my machine is a screw driven pressure thingy).
 

·
Registered
Joined
·
2 Posts
Discussion Starter · #3 ·
fleece blankets made for sublimation carry instructions of 385 degrees for 70 seconds with light pressure. use a lint roller first.

Without knowing who made your blankets, I would test a corner first if possible.
Thank You!! The blanket was made by a company called Vellux:

Vellux Microfleece Blanket, Twin, Star White

I don't know where my friend got it. but I'm suspeting it's from Amazon.
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top