T-Shirt Forums banner

DTG VIPER Load roll Paper

2288 Views 2 Replies 3 Participants Last post by  Don-ColDesi

I have a slight problem with my Viper

Sometimes when i press load and then send a print we get a error message telling us to load roll paper. but when this is on the machine is basically frozen not letting us do anything apart from turn off and turn back on.. when back on the message clears until it decides to come on again

Anyone else have this error problem?

1 - 3 of 3 Posts
I have the same problem did you get ti fixed?
Press SELECT (left arrow) on the control panel - do this until the Roll Icon is displayed.

There are three modes - Roll, Roll with Cutter and Sheet. Likely you are in sheet mode.

Hope this helps.
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.