T-Shirt Forums banner

1 - 2 of 2 Posts

·
Registered
Joined
·
12 Posts
Discussion Starter #1
Hi there,

(I live in Turkiye, Cappadocia)

I'm the newest DTG Viper owner.

I bought it just 1 month ago..

a few days ago I had a bad print head problem. When changing the head i give a damage to the wires which is connecting to the head.

service changed the wires and the head. then i started to print with no problems.

But today when i opened my viper to print the first job, it gave me 0001001B problem.

firstly i closed and opened the viper than started to print but somethings was going wrong...

here is the photo of the job:



DSC02282 on Flickr - Photo Sharing!

my nozzle check was perfect...

then i turned of and then on the viper... the same code is with me again... 0001001B

I learned that this problem is just because of the head heat. Then I controlled the wires connected to the head but nothing is changed.

Can you help me with this problem? What shall i do?
 

·
Registered
Joined
·
371 Posts
The head hot error can be caused by a number of different reasons.

I strongly recommend that you contact TTS who sold you the machine so that they can advise you properly or they themselves can service your machine.

Regards
Jerry
DTG Digital
 
1 - 2 of 2 Posts
Top