T-Shirt Forums banner
1 - 6 of 6 Posts

· Registered
Joined
·
5 Posts
Discussion Starter · #3 ·
We had to install a new main control board. The one that is on top of the printer when the cover is off. After we installed it we printed for one day and the small belt that drives the conveyor belt strecthed and stoped working. Have you had any registration issues in dark shirts?
 

· Registered
Joined
·
6 Posts
I had to replace the mother board, recalibrate and adjust the CR lock and then the switch which tells the machine were the platen is, had to be adjusted as it was sticking on ever other pass. The machie is only about two months old. We seem to be ok on black and white shirts but are having some registration problems on colours. I don't actully do the printing but I have been trying to help the employee that does.
 

· Registered
Product manager @achitex minerva Digital textile inks
Joined
·
2 Posts
Goooood isolve the problem i use the program for epson i put the model r1900 and i rest the waste ink pad counter.
turn off e on the machine and good work
 
1 - 6 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top