T-Shirt Forums banner

1 - 2 of 2 Posts

·
Registered
Joined
·
6 Posts
Discussion Starter #1
I recently bought a used DTG Kiosk 2 and I've been having some problems with it. The first thing I had to do was replace the printhead manifold, wiper assembly, and all the lines. Pretty much everything inside the printer was clogged. Now, I still can't get it to print. It won't print a single drop of ink. Can anyone give some advice? Thanks
 

·
Registered
Joined
·
54 Posts
do you have more info? like

you replaced the manifold, wiper assembly and lines ... well i dont have that kind of machine but pretty much all machines have the same functions. consider this


cartridges not clogged (manually check with a seringe)

lines connectors not clogged

lines not clogged

dampers not clogged

manifold not clogged and not leaking

printhead (flush) to confirm not clogged

after all this if everything is ok and you have a normal ink fluid you need to check your pump, caping station. you can manually check if fluid is going trough cap

its like a fuel system, you need to confirm all lines, filters, valves, and injectors have continuity, then if th pump is working or not,. after all that checked, you must find some results

have good day.
 
1 - 2 of 2 Posts
Top