T-Shirt Forums banner

Does anyone know what dryer this is, it's being used to cure shoes?

1385 Views 7 Replies 5 Participants Last post by  jgabby
Is anyone familiar with the dryer in the attached photo? I saw it in use at the Converse Store. They were curing Converse shoes printed with a Brother 782. Make and Model anyone???

Thanks in advance for your help.

Attachments

See less See more
1 - 8 of 8 Posts
Hix offers a 3d object dryer used to dryer items such as footwear.
Most companies refer to this type of dryer as a dryer box. The drawer slides out and you put a product into it. It could be a t-shirt / something flat or it could be something that is not flat (i.e. shoe). You close the drawer and the timer starts to calculate the dwell time. When finished, an alarm sounds to open the drawer or there are fancy ones that automatically open the drawer.

Here is a link to the one that was mentioned above for Hix - HIX Corp - Verticure. There are other ones by different manufacturers as well.

Best wishes,

Mark
Thanks for the info and link Mark. The HIX Corp - Verticure pictured in the link doesn't look much like the attached photo. Do you think the picture I have is one of a different manufacturer?

Thanks
There's also one called the Sarrah.it has 6 drawers
Thanks for the info and link Mark. The HIX Corp - Verticure pictured in the link doesn't look much like the attached photo. Do you think the picture I have is one of a different manufacturer?

Thanks
Yes, it probably comes from another manufacturer. Lawson, Interchange and All American I believe have come out with something similar in the past. Would not be surprised if Workhorse has done one as well. There are also manufacturers outside the USA. The concept is not overly difficult to create. It is just a forced air oven similar to a convention oven. So you don't have to have the same exact dryer. Just need one with a drawer that has a depth to handle your thickest item.

Mark
1 - 8 of 8 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top