T-Shirt Forums banner

DIY washout booth

799 Views 1 Reply 2 Participants Last post by  Printavo
heres my DIY washout booth. cost me about $75 to build and about 8-10 hours. used 2x2's because 2x4's are too bulky in my opinion. used cheap plywood for sides then laminated with NRP plastic panels. glued on with 100% silicone caulking. sealed corners with silicone caulk. painted outside with latex paint.


See less See more
  • Like
Reactions: 3
1 - 2 of 2 Posts
That's awesome, you should a blog post on the process for others.
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.