T-Shirt Forums banner

Discoloration issue

755 Views 3 Replies 2 Participants Last post by  Amw
2
I purchased the Cobra ink CIS on the wf -7110 using it for heat transfers and as you can see it seems to do what it wants with the colors the 2nd pic is after a cleaning and a few checks which came back almost perfect. The light green is so dark I think due to issues with yellow which I have been having despite it showing up in the nozzle checks. Any tips on better colors?

PS. Don't get me started on the quality of the image if I don't have it on high. I get line galore through the whole picture

Attachments

See less See more
1 - 4 of 4 Posts
I purchased the Cobra ink CIS on the wf -7110 using it for heat transfers and as you can see it seems to do what it wants with the colors the 2nd pic is after a cleaning and a few checks which came back almost perfect. The light green is so dark I think due to issues with yellow which I have been having despite it showing up in the nozzle checks. Any tips on better colors?

PS. Don't get me started on the quality of the image if I don't have it on high. I get line galore through the whole picture
Are you using the color profile from cobra?
I think so. It was a quick download . Then most definitely.
I think so. It was a quick download . Then most definitely.
When you print you need to select the profile each time. Also you need to turn off color management in the printers settings.

You dont just install it. If using Photoshop to print with, you will select the color profile from a drop down list. same place you will select Photoshop handles the color management.

If your not doing this or something like this, you are not using the color profile and your colors will not come out as expected.
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top