HI everyone, i am printing using an Epson F2000. My prints have been fine up until now. Printing onto red t-shirt the white is coming out blochy. i am pre treating as normal. Yesterday i printing on the back of the t-shirt only white and it came out ok. today i have tried to print coloured on the other side and the white is blochy. i tried to print with only the white option in garment creator and the same happened. now i am printing other white prints on different t-shirts and they are coming out ok any ideas??? please help i have a client who is waiting for them
i have pictures on this link. the red t-shirt is the problem one, with the white print salvataggio lifeguard on its own it the print from yesterday, instead salvataggio with the two logos above is the problem print.
many thanks in advance for your help
https://www.dropbox.com/sh/yw9zl395ipm06jm/AADUCuHusegcDRd5ingS-tWGa?dl=0
i have pictures on this link. the red t-shirt is the problem one, with the white print salvataggio lifeguard on its own it the print from yesterday, instead salvataggio with the two logos above is the problem print.
many thanks in advance for your help
https://www.dropbox.com/sh/yw9zl395ipm06jm/AADUCuHusegcDRd5ingS-tWGa?dl=0
i will do it too
