T-Shirt Forums banner

design placement on mens tanks

1776 Views 1 Reply 2 Participants Last post by  chuckleberryy
How far down on a mens tank should you print a design that is approx 7" tall. On a regular t I would put it approx 2.75" down from bottom of collar, but that is too low from the neck line on a mens tank. Any help would be appreciated, Waiting to print now. Thanks n advance. Kim
1 - 2 of 2 Posts
The "industry standard" for front prints is three fingers (approximately 2 in.). For a men's tank, i may raise it up a bit (approximately two fingers, or an 1.5 in) hope that helps
Experience is a cruel but wonderful teacher
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.