T-Shirt Forums banner

1 - 3 of 3 Posts

·
Registered
Joined
·
679 Posts
Discussion Starter #1
Dumb question:

Since the max print area of the Veloci Jet is 13x24, how do you cure a full 24" length print? I only saw a couple of jumbo sized heat presses, and i'm not sure I want to pay $3k for a new one. (Currently have 16x20 Hotronix.)

Is it possible to cure half the shirt, adjust the shirt, then cure the other half? (or the last 4 inches, lol.)
 

·
Registered
Joined
·
5,720 Posts
You could, of course, purchase a 20 x 24 heat press. But the most common 16 x 20 size would work fine. You will just have to, as you have pointed out, cure 1/2 or more of the print and then move the shirt over to cure the remaining portion.

Harry
Equipment Zone
 

·
Registered
Joined
·
5,720 Posts
Just as an additional note to the maximum 24" print size, the SpeedTreater Automatic Pretreater that many get along with the Veloci-Jet has the capability to pretreat up to a 25 inch long area.

Harry
Equipment Zone
 
1 - 3 of 3 Posts
Top